How much does AC repair cost in Brooklyn?

AC repair in Brooklyn typically costs between $150 and $600, depending on the type of repair needed. Diagnostic visits at Vinco Mechanical start at $89. Common repairs include refrigerant recharge ($200-$400), compressor repair ($300-$600), and thermostat replacement ($150-$300). We provide upfront pricing before any work begins so you always know the cost.

What is the best HVAC system for a Brooklyn brownstone?

Ductless mini-split systems from Daikin or Mitsubishi are widely considered the best HVAC solution for Brooklyn brownstones. They require no ductwork, provide zone-by-zone temperature control, offer both heating and cooling, and are highly energy efficient. A typical 3-zone mini-split system costs between $8,000 and $15,000 installed, with significant rebates available through Con Edison and federal tax credits.

Do I qualify for HVAC rebates in NYC in 2026?

Many NYC homeowners qualify for multiple HVAC rebates: Con Edison offers up to $1,000 for qualifying equipment upgrades. NYSERDA provides additional incentives. Federal IRA tax credits offer up to $2,000 for heat pumps and up to $8,000 for qualifying low-income households. Vinco Mechanical helps Brooklyn homeowners identify and apply for all available rebates.

Does Vinco Mechanical offer 24/7 emergency HVAC service in Brooklyn?

Yes. Vinco Mechanical provides 24/7 emergency HVAC repair service throughout Brooklyn, Manhattan, Queens, and all NYC boroughs. For heating or cooling emergencies, call (718) 835-6820 and a certified technician will be dispatched promptly.

How often should I service my HVAC system in New York City?

In NYC, HVAC systems should be professionally serviced twice per year: once in spring before cooling season and once in fall before heating season. Regular maintenance extends system life by 5-10 years and can reduce energy bills by up to 25%.

What brands of HVAC equipment does Vinco Mechanical install?

Vinco Mechanical specializes in Daikin and Mitsubishi ductless mini-split systems, ideal for NYC brownstones, pre-war apartments, and commercial spaces. We also install and service equipment from other major brands for central air, furnaces, boilers, and commercial HVAC systems.

What areas in Brooklyn does Vinco Mechanical serve?

Vinco Mechanical serves all of Brooklyn including Williamsburg, East Williamsburg, Park Slope, Bushwick, Bed-Stuy, DUMBO, Brooklyn Heights, Bay Ridge, Flatbush, Crown Heights, Greenpoint, Cobble Hill, Carroll Gardens, Fort Greene, Prospect Heights, and Sunset Park. We also serve Manhattan, Queens, and other NYC boroughs. Our office is at 993 Grand St in East Williamsburg.

Rooftop Unit Service NYC

Commercial rooftop unit installation, repair, and replacement across New York City. Crane coordination, curb adapter fabrication, DOB permits, and all major brands. Carrier, Lennox, York, and Trane specialists.

Get an RTU Quote → Call (718) 835-6820

✓ Crane Coordination ✓ DOB Permits ✓ All Major Brands ✓ 24/7 Emergency

RTU Services

Complete Rooftop Unit Solutions

Rooftop units are the workhorses of commercial HVAC in NYC — found on retail buildings, restaurants, offices, and warehouses across all five boroughs. Vinco Mechanical handles every aspect of RTU service, from routine maintenance to full crane-lift replacements on busy Manhattan streets.

RTU Installation

New rooftop unit installation with crane coordination, curb adapter fabrication, ductwork connections, electrical, and gas. DOB permits and inspections handled. Carrier, Lennox, York, Trane, and Rheem. $8,000–$25,000.

RTU Replacement

Old unit removal and new unit installation. We handle crane scheduling (including early-morning or weekend lifts for busy streets), rigging, and disposal of old equipment. Curb adapter modifications included.

RTU Repair

Compressor failure, blower motor issues, gas valve problems, ignition failures, refrigerant leaks, electrical faults, and control board replacements. Same-day service available. All brands serviced.

RTU Maintenance

Bi-annual preventive maintenance: coil cleaning, filter replacement, belt inspection, electrical tightening, refrigerant check, burner inspection. Extends RTU life 5–8 years and cuts energy costs 15–25%.

NYC Logistics

Why RTU Work in NYC Requires Specialists

Rooftop unit work in New York City isn't like anywhere else. Crane lifts on narrow Manhattan streets require DOT permits and careful traffic planning. Brooklyn buildings may have limited roof access. DOB permits are required for most RTU installations. Vinco handles all of this — you don't need to coordinate with the city or crane companies separately.

We schedule crane lifts during early-morning or weekend hours when possible to minimize street disruption. For buildings on busy commercial corridors, we coordinate with local precincts and the DOT for necessary street closures. This logistical expertise is what separates a qualified NYC RTU contractor from a general HVAC company.

FAQ

Rooftop Unit Questions

How much does rooftop unit replacement cost in NYC?

RTU replacement in NYC typically costs $8,000–$25,000 depending on unit size (tonnage), brand, and crane/logistics requirements. Crane rental adds $2,000–$5,000 per lift day. DOB permits add $500–$1,500. Vinco provides fully itemized quotes covering every cost upfront.

How long do rooftop units last in NYC?

With regular maintenance, NYC rooftop units typically last 15–20 years. Without maintenance, expect 10–12 years due to harsh rooftop exposure, extreme temperatures, and heavy commercial use. Bi-annual maintenance can add 5–8 years to an RTU's lifespan.

Do you handle crane coordination for RTU replacement?

Yes — Vinco handles all crane logistics including crane rental, rigging, DOT street closure permits, early-morning scheduling for busy streets, and coordination with building management. You don't need to hire a crane company separately.

Need RTU Service in NYC?

Installation, repair, replacement. Crane coordination included.

Get an RTU Quote → Call (718) 835-6820